Slicing 3D Print Files
From TSAS Library
Slice Your Model
- Download/open Cura
- Choose PrintrBot Play when prompted
- Download settings file here. (It is safe; I made it.)
- Go to "File," select "Open Profile," then locate the settings file you downloaded
- Layer height should be .26
- Shell thickness is always set to multiples of the nozzle size (.4 mm in this case), so reduce to .8mm
- Reduce fill density to 10%
- Support type should be "Everywhere"
- Platform adhesion type should say "Brim"
- Click your model, then play with the three tools on the bottom. The middle one scales the model
- Pay attention to the time it will take to print your model; 30 minutes is fine. If it takes much longer, scale the file down. If it is really short, scale it up
- With the model selected, click View Mode in the top right, and choose Layer
- This shows the layers created by the slicer. Can you read the letters? If not, scale up your badge. If you scale it to the max and still can't read it, rebuild the badge with larger text
- Press the save button on the middle top, and name your file with your name, a description, and the color you want, e.g. paul badge black.gcode